Tool Guides

A practical guide to using a watch demagnetiser, checking the result, and knowing when magnetism is not the real timing fault.

A practical guide to freeing a stuck watch spring bar without marking the lugs, choosing the right tool, and knowing when to replace the bar.

A practical guide to checking watch hand clearance after fitting, with safer ways to correct hands that rub, touch the dial or stop the movement.

A careful beginner guide to choosing the right case opening method and avoiding avoidable marks around the case back.

A practical guide to freeing a tight bracelet screw without chewing the slot, damaging the link or using the wrong tool for the job.

Learn how to measure, cut and test-fit an NH35 watch stem without damaging the crown thread or making the stem too short.

A practical guide to checking the gasket, choosing press dies and closing a snap back watch case without damaging the crystal, crown or case back.

Learn when a pin vice helps on the watch bench, when to avoid it, and how to use one carefully for small drilling, broaching and stem handling tasks.

A practical beginner guide to fitting hour, minute and seconds hands squarely, checking clearance, and avoiding dial or hand damage.

A practical guide to storing loose watch hands safely during repair, with tips for order, dust control, dial protection and refitting.