Free AU Shipping Over $250*
Australian Stock
Local Support

Watchmakers Loupe Magnification Guide

Scope

This technical guide explains common loupe magnification ranges used for watch inspection and repair bench work. It is intended as a reference for choosing magnification by task and working distance.

Bergeon 2611-TN Catalogue Reference

The current WRT product listing gives the following values for the Bergeon 2611-TN. They are catalogue-stated focal lengths, not measured eye-to-part working distances, and must not be applied to other loupe models.

MagnificationFocal length stated in the listing
2.5x100 mm
2.8x90 mm
3.3x80 mm
5x50 mm
6.7x40 mm

Source: WRT Bergeon 2611-TN listing, checked 3 November 2026. These values have not been independently measured by WRT for this guide. No working-distance figures have been verified here for the aluminium loupes.

Practical Selection Guidance

The following is selection guidance, not a manufacturer-prescribed magnification for a particular repair. Compare the actual loupe’s field of view, comfortable viewing position and room for your tools. A higher number alone does not establish that it is better for your task.

  • For handling tools, choose a view that lets you see both the part and the tool tip without forcing an uncomfortable posture.
  • For inspecting a stationary detail, compare whether additional magnification reveals what you need to see.
  • Do not calculate or promise a model’s usable working distance from magnification alone. Use its documentation or a direct measurement.

Inspection vs Working Magnification

Inspection magnification is used when the part is still and the goal is to check detail, surface condition, contamination, damage, or alignment.

Working magnification is used while handling tools or moving parts. It usually needs more working distance and a wider field of view, so moderate magnification is often more practical.

Loupe Holding Options

OptionUse CaseTrade-Off
Eye loupeCompact bench inspection and short repair tasksRequires practice to hold comfortably.
Wire loupe holderKeeping an eye loupe in place without holding it by eye pressureAdds a holder to the setup and may need adjustment.
Head magnifierLonger sessions where hands-free viewing mattersBulkier than a simple eye loupe.

Related WRT Pages

Scroll to Top