Free AU Shipping Over $250*
Australian Stock
Local Support

Do You Need a Watch Timegrapher With a Printer

Separate printer supplied with the MTG 9900A mechanical watch timegrapher system

A printer is not essential for using a watch timegrapher. For a home bench, a notebook or a clear photograph of the display can be enough. Printed results become useful when you need a repeatable record for several watches, a repair job file or a comparison before and after work.

The buying decision is therefore about your record keeping, not whether paper makes the measurement more accurate. Before paying for a printer-equipped system, decide what you need to record and how you will find it again.

Separate the measurement from the record

A timegrapher observes the timing behaviour of a mechanical watch. A printer provides a way to retain the instrument’s output. It does not add a missing diagnosis or turn a brief reading into proof of a complete service.

If the terminology is new, start with our guide to what a timegrapher tells you. Choosing how to save the result is a separate question from understanding rate, amplitude and beat error.

When printed records can help

Paper can be convenient if you keep an individual job envelope with each watch. A dated result can stay with the inspection notes instead of becoming an unidentified photograph on a phone. It can also help when you regularly compare the same watch at different stages of a repair.

MTG-9900A timing unit with microphone and separate printer shown together

WRT’s MTG-9900A Mechanical Watch Timegrapher System is listed with a timing unit, automatic microphone, printer and the accessories shown in its complete-system photograph. That makes it an example of a printer-equipped setup, not a requirement for every hobby bench.

Before choosing any system, confirm the exact output format, connection requirements and replacement paper with the supplier. Do not assume a printer from another model will work, or that every value shown on the screen appears on paper.

Give each result enough context

A detached strip of numbers is easy to misinterpret. Whether you print, photograph or write down the result, keep these details with it:

  • A job reference and the movement identity, where known.
  • The date and whether the reading was taken before or after the work.
  • The tested position and the winding state or winding routine.
  • The instrument settings, including the lift angle used for the movement.
  • The displayed result and any unstable trace or difficulty obtaining a reading.

Add missing details by hand or in the accompanying job sheet. There is no need to put a customer’s contact information on a loose test slip. A job reference is usually more useful for keeping the record connected to the right watch.

Keep the test routine consistent

Close view of the MTG-9900A system microphone and watch holding fixture

A useful comparison needs more than matching printouts. Record the watch position, use the movement’s appropriate settings and follow a consistent winding and settling routine. If those conditions change, note the change rather than treating the new number as a direct improvement or deterioration.

Our guide to reading a timegrapher result explains the readings themselves. A printer cannot compensate for an incorrect setting, an uncertain signal or an unrecorded change of position.

When a notebook or photograph is enough

If you work on one watch occasionally, a simple record may be easier to maintain than another bench accessory. Photograph the display clearly, then name the file with the job reference, date and position. Keep a separate note of settings and conditions that the photograph does not show.

A notebook works just as well when you record the same fields every time. Leave space for later observations and avoid copying only the most flattering reading. Neither method requires a printer, but both require a routine.

Choose the workflow before the accessory

Choose a printer-equipped timegrapher when paper records genuinely fit the way you manage repairs and the supported output meets your needs. Choose a simpler recording method when it is easier to label, store and retrieve consistently.

Most importantly, describe the result honestly. It is a timing observation under recorded conditions, not a water-resistance certificate, a guarantee of future accuracy or proof that every part of the movement is in good condition.

Relevant Products

Ben Holdaway, founder of Watch Repair Tools

Written by

Ben Holdaway

Founder of Watch Repair Tools. Ben writes practical guides for watch enthusiasts and beginner repairers, with a focus on choosing the right tools, setting up a cleaner bench, and making repair work feel less intimidating.

On Sale

Scroll to Top